Smart Home Automation — ND, MN & SD

Your Home Should
Work for You.
Not the Other Way Around.

Holsen Solar designs, installs, and programs complete smart home systems — lighting scenes, climate control, AV, security, and whole-home automation. One contractor, one call, everything works together from the moment we leave.

Your Home — All from One App
🛋️
Living Room
72°  ·  Evening Scene
🛏️
Master Bedroom
68°  ·  Dimmed 30%
🍳
Kitchen
Lights off
🚗
Garage
Door closed  ·  EV charging
🌡️
Thermostat
Heat  ·  Schedule active
"Good night" scene activates in 22 minutes
Illustrative — your system is programmed to your routines
Licensed Electricians — ND, MN & SD
Design, Install & Programming Under One Roof
Residential & New Construction
Integrates with Solar, Storage & EV Chargers
Local Support After Install
What We Do

Complete Smart Home Systems. Designed for How You Actually Live.

Most "smart home" projects end with a drawer full of incompatible gadgets that don't talk to each other. We do it differently. We assess your home, design a system where every component is chosen to work together, pull the permits, do the electrical work, install the hardware, and program the automations — before we hand you the app.

Because we're licensed electricians, we can handle the low-voltage wiring, in-wall speaker runs, network drops, and device installations that most AV and automation dealers have to subcontract out — or skip entirely.

The result is a system that works reliably from day one, integrates cleanly with your solar and EV charger, and is supported locally by the same team that installed it.

Schedule a Free Design Consultation →
What's Included in a Holsen Smart Home Install
In-home design consultation — no obligation
Full system design and equipment spec
Licensed electrical work, wiring, and permitting
Hardware installation and network setup
Automation programming — scenes, schedules, voice
Walk-through and training before we leave
Local support for adds, changes, and questions
What We Automate

Every System in Your Home.
Working Together.

We install and integrate smart systems across every category — from lighting scenes to whole-home audio. Everything is designed to work from a single app or a single voice command.

💡
Smart Lighting
Automated scenes, dimmers, and whole-home lighting control
Most Popular

Smart lighting is the foundation of every automation system we build. We install smart switches and dimmers throughout your home so every light is controllable from an app, a voice assistant, or a programmed schedule — without replacing bulbs every six months.

We program scenes — "Morning," "Movie Night," "Away," "Good Night" — that set every light in the right room to the right level with a single tap. Sunset-to-sunrise automations run without you thinking about them. And because we wire everything properly, you keep normal switches as backups.

Ask About Smart Lighting →
🌅

Scenes & Schedules

One tap sets every light in the house. Programmed schedules run on their own.

🎙️

Voice Control

Works with Alexa, Google Home, and Siri. No hub required for most setups.

🔌

Keep Your Switches

Smart switches installed in-wall. Normal switch still works as backup.

🌡️
Climate Control
Smart thermostats, zoning, and whole-home comfort on a schedule
📱

Remote Control

Adjust your home's temperature from anywhere. Start warming up before you leave the office.

📅

Smart Schedules

Auto-setback when you're away. Pre-heat or pre-cool for your arrival. Integrates with your daily routine.

Solar Integration

Pre-condition your home using solar production instead of grid power. Works with Emporia monitoring.

A smart thermostat is one of the simplest upgrades with one of the highest paybacks. We install and configure Ecobee, Honeywell Home, or Google Nest thermostats — programmed to your schedule, not the factory default that no one ever changes.

For homes with solar, we can set up pre-conditioning schedules that run your HVAC during peak production hours — using the energy you're generating rather than buying it back later from the grid.

Ask About Smart Climate →
🔊
Whole-Home Audio & AV
In-ceiling speakers, distributed audio, and TV control — all from one app

We run in-wall and in-ceiling speaker wiring, install distributed audio systems, and integrate streaming sources so the right music is always in the right room — without a rats' nest of remotes and receivers.

TV and AV control is unified into the same app as your lighting and climate. One "Movie Night" scene dims the lights, lowers the shades, powers on the TV, and starts your streaming service. Designed once. Works every time.

Ask About Whole-Home Audio →
In-Ceiling & In-Wall Speakers
Flush-mounted, wired for the cleanest install. Kitchen, patio, garage, living areas.
Multi-Zone Audio
Different music in every room. Or the same song through the whole house. Your call.
TV & AV Control
All your sources, unified in one app. No more remote juggling.
Outdoor & Garage Audio
Weatherproof speakers for the deck, patio, or shop. Same app as the rest of the house.
🔐
Access & Security Integration
Smart locks, video doorbells, and access control tied into your automation system
🔒

Smart Locks

Keypad or app access. Auto-lock on schedule. Give temporary codes to guests or contractors.

📹

Video Doorbells

See who's at the door from your phone. Integrated with your camera system if you have one.

🚪

Garage Integration

Smart garage door openers tie into your "leaving home" routine. Never wonder if you closed it again.

Smart access and security devices are most powerful when they're integrated into your automation system — not living in five separate apps. We tie smart locks, doorbells, garage doors, and camera systems into your central platform so everything works together.

For full professional camera and access control systems, see our Cameras & Door Access page. We can install a standalone smart home system, a full security system, or both as one integrated project.

Ask About Access Control →
What We Install

Platforms & Products We Work With

We're platform-agnostic — we recommend the right system for your home and budget, not just whatever we have in the warehouse. These are the platforms we install and support.

Google Home

Ideal for homes already in the Google ecosystem. Works seamlessly with Nest thermostats and Android devices.

Amazon Alexa

Broad device compatibility and the widest selection of supported smart home hardware. Great for mixed-device households.

Apple HomeKit

Best privacy and the most seamless iPhone/iPad/Mac experience. Ideal for Apple-first households.

Matter / Thread

The new cross-platform standard. We install Matter-compatible devices that work with any platform — future-proof by design.

Lutron & Leviton

Professional-grade smart switches and dimmers. Reliable, code-compliant, and compatible with all major platforms.

Ecobee & Nest

The two smart thermostat platforms we recommend and install most often. Both integrate with solar monitoring.

Already Have Some Smart Home Devices?

We can often integrate your existing devices into a unified system rather than starting over. Tell us what you have in our consultation and we'll design around it where possible.

Book a Free Consultation →
Building a New Home?

Smart Home Is Easiest — and Cheapest — to Do During Construction.

Retrofitting a smart home into a finished house means fishing wires through walls, cutting drywall, and patching when you're done. During new construction, we run structured wiring for audio, low-voltage for automation, and the electrical rough-in for every smart device — all before the drywall goes up.

The result is a cleaner install, lower cost, and a home that's built smart from the foundation up. We work directly with your builder or GC and show up when the electrical rough-in crew does.

We also pre-wire for solar, battery storage, and EV charging at the same time — so your new home is ready for all of it, whether you install it now or later.

Talk to Us About New Construction →
Structured Wiring
Cat6, speaker wire, HDMI, and coax run cleanly before drywall. Never fish a wall again.
Smart Switch Rough-In
Neutral wires at every switch location — required for smart switches that aren't included in standard electrical plans.
Solar & EV Ready
Pre-wire for solar conduit, battery storage, and a 50A EV circuit while the walls are open.
Network Infrastructure
Dedicated network closet, wired access point locations, and proper PoE runs for reliable whole-home Wi-Fi coverage.
One Contractor for All of It
We're on your electrical permit. Electricians, low-voltage, and AV rough-in — one crew, one schedule, one point of contact.
The Process

How a Holsen Smart Home Project Works

From first call to final walkthrough, here's what to expect.

01

Design Consultation

We visit your home (or review your new construction plans), walk through your goals, and design a system that fits your lifestyle and budget. No obligation. No pressure to go with every option.

02

Proposal & Scope

You get a detailed, itemized proposal: exactly what's included, what each component does, and the all-in price. We answer every question before you sign anything.

03

Installation

Our licensed electricians handle wiring, device installation, and network setup. Clean work, code compliant, permitted where required. We treat your home the way we'd treat our own.

04

Programming & Handoff

We configure your scenes, schedules, and automations before we leave. Then we walk you through the app, answer every question, and make sure you're comfortable. That's the job — not just the install.

Why Holsen Solar

We're Electricians First.
That Changes Everything.

Most smart home companies are AV dealers or tech integrators. They hire electricians as subcontractors — or worse, they clip things in and call it done. We're licensed master electricians who also do smart home. That means we do the real electrical work in-house, we understand how your home is wired, and we can troubleshoot problems that a non-electrician can't even see.

Schedule a Free Consultation →
01

Licensed Master Electricians

ND M4310  ·  MN EA807321  ·  SD (pending). We pull permits, pass inspections, and warranty our electrical work.

02

One Team for Everything

Solar, EV charger, smart home, security — we install all of it. No subcontractors. No finger-pointing when something doesn't work right.

03

We Program Before We Leave

The scenes, schedules, and automations are set up and working when we walk out the door. You're not getting a manual and a "good luck."

04

Local — Fargo-Based, ND/MN/SD Licensed

We're in your market. When you have questions or want to add something, you call the same team that installed it.

The Holsen Promise

Every Install Backed by These Four Commitments.

Code Compliance

All electrical work to local, state, and national codes. Fully permitted and inspected on every job.

Transparent Pricing

Detailed proposal before work begins. No hidden fees — the quote is the price.

Professional Programming

Scenes, schedules, and automations configured and working before we leave. Training included.

Local Support

Want to add a room or change a scene? You call us. Same team, same phone number, no runaround.

The Complete System

Smart Home Is Better When It's Connected
to Everything Else We Install.

Energy Management

See and Control Every Circuit from One App.

Pair your smart home with a Span smart panel and Emporia energy monitoring. Automate EV charging based on solar production, run your HVAC during peak generation, and see exactly where your energy dollars are going — all from the same ecosystem.

Learn About Energy Management →
Solar Energy Systems

Power Your Smart Home with the Sun.

Smart home automation combined with solar and battery storage means you can prioritize which devices run on solar, shift loads to off-peak hours, and run your home intelligently even when the grid goes down.

Learn About Solar →
Cameras & Door Access

Security That Actually Works with Your Home.

Professional camera systems and access control installed by the same licensed electricians who did your smart home. Everything integrates into one platform — no separate app for cameras, no separate app for locks.

Learn About Cameras & Access →
Where We Install

Service Areas

Smart home automation installation for residential customers and new construction across Eastern ND, Western MN, and Aberdeen, SD.

Fargo, ND West Fargo, ND Moorhead, MN Detroit Lakes, MN Grand Forks, ND Valley City, ND Wahpeton, ND Fergus Falls, MN Jamestown, ND Dilworth, MN Pelican Rapids, MN Aberdeen, SD

Ready to Make Your Home Work Smarter?

Schedule a free in-home design consultation. We'll walk through your goals, design a system that fits your home and budget, and give you a detailed quote with no obligation.

Get a Free Consultation → Call (218) 787-6527

Licensed Electricians  ·  Design, Install & Programming  ·  ND, MN & SD